Standard FeaturesStandard features for Hylectric systems include:
Clamp
- Wide tiebar spacing
- Closed-loop, low-force, mold protection
- Closed-loop clamp force control
- Regenerative mold stroke hydraulics for energy efficiency
- Large gates for easy access to mold area for part removal
- Mold break force - up to 10% of clamp force
- Euromap or SPI mold mounting faces
- Wide range of hydraulic, air and mold cooling options
|
Injection
- Closed-loop control of injection speed, hold pressure, back pressure and fill pressure limiting
- Ring or ball check valve
- Wear-protected screw (Colmonoy® 56) and bi-metallic barrel as standard equipment
- Electric extruder drive
- Accumulator-assisted hydraulic system and injection
- Mineral-insulated heater bands
- Supported barrel (RS45 and above)
- Wide range of drive and screw selection options for optimum performance on each application
|
Controls
- Polaris Control - Intel® processor with Windows® operating system
- User-programmable functions - corepull, robots, etc.
- User-programmable access levels
- Remote diagnostics and troubleshooting capability
- Flat-panel color operator interface with touchscreen controls
- Ports for parallel printer, external keyboard and mouse, external screen, Ethernet and modem
- 20,000 machine event log and report generation
- Save and output 10,000 cycles of process values
- Real-time language and unit switching
|
Hydraulics
- Independent servo valve control of clamp tonnage, mold stroke and injection
- Variable displacement pumps
- High efficiency water-cooled drive motor
- Noise-reducing, fully enclosed power pack
- High-flow bypass oil filtration (5 micron) with pressure drop monitoring
- Pressurized oil tank for minimum contamination
- Centralized oil collection and recovery system
- Quick connectors for hydraulic gauge (supplied) at key hydraulic test points
|
